FREE ESSAY ON WHAT DOES THE HP TERAMAC HAVE TO DO WITH THE MOLETRONICS

WHAT DOES THE HP TERAMAC HAVE TO DO WITH THE MOLETRONICS

\documentstyle[11pt,psfig]{article}
\pagestyle{myheadings}
\markboth{}{}
\setlength{\topmargin}{0in}
\setlength{\oddsidemargin}{0in}
\setlength{\evensidemargin}{0in}
\setlength{\textwidth}{6.5in}
\setlength{\textheight}{8.5in}
\Bibliographystyle{ieeetr}
\newcommand{\spacedouble}{\renewcommand{\baselinestretch}{1.40}\Huge\normalsize}
\newcommand{\spacesingle}{\renewcommand{\baselinestretch}{1.0}\Huge\normalsize}
%\renewcommand{\thesection}{\Roman{section}}
\newtheorem{definition}{Definition}
\newtheorem{property}{Property}
\newtheorem{theorem}{Theorem}
\newtheorem{corollary}{Corollary}
% The following is to change Reference to Bibliography
%\renewcommand{\theBibliography}[1]{{\section*{Bibliography}}\list
%
{[\arabic{enumi}]}{\setlength{\itemsep}{-0.05in}\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
% \advance\leftmargin\labelsep
% \usecounter{enumi}}
% \def\newblock{\hskip .11em plus .33em minus .07em}
% \sloppy\clubpenalty4000\widowpenalty4000
% \sfcode`\.=1000\relax}
%\let\endtheBibliography=\endlist
\begin{document}
%\setcounter{section}{4}
\title{{\bf What does the HP Teramac have to do with Moletronics?}}
\author{{\em Nan Zhang\ }\\
\\
Department of Computer Science \\
Michigan State University \\
East Lansing, MI 48824\\
{\tt nanzhang@cse.msu.edu}\\
\\
}
\date{\empty}
\maketitle
% To change the page number:
%\setcounter{page}{400}
\section{Introduction}
\label{SE:intro}
Recently, one of the main microprocessor manufacturer Intel Corp.
announced that a bug within a small number of their Coppermine
microprocessors had been found. And this was not the first time
Intel presented similar announcement. Also, another CPU giant AMD
has been suffered from design and manufacture defect in their
microprocessors for a long time.
The traditional paradigm for computer hardware is to design the
specific circuit including the gates, wires and the way they
connected, and built it perfectly. Perfection of the components is
the baseline of modern computer hardware--a single design or
manufacture defect can cause the entire system crashed. It is
thought that with the chip's increasing of complexity and
shrinking in size, the defect is inevitable, either in design or
manufacture process. An observation that is sometimes called
Moore's second law alleged that the cost of integrated circuits
factories are escalating exponentially with time for attempting to
keep perfection of chips. Then by the year 2012, a single
fabrication plants could cost up to 30 billion dollars.\cite
{Teramac98}
As we know, the next generation electronic technology--Moletronics
is a promising way to design faster and more powerful computers.
Computers by moletronics technology is typically constructed by
random chemical and physical procedures, thus the defect in final
product is inevitable. For Moletronics, it is even harder and
economically infeasible to keep all its component perfect. It is
seemed that even though finally we can make out a prototype of
Moletronics computer, the high price will keep most of the users
out of the door.
The resolution to this problem may come from a newly developed
prototype supercomputer in HP, called Teramac. Although the
architecture of the prototype is built on conventional electronic
method. Its principles and approaches will apply a great impact on
Moletronics technique.
\section{Basic Concepts}
\label{SE:concepts}
The name Teramac comes from the word Tera which means
Trillion or ${10^{12}}$, and mac from Multiple Architecture
Computer. The key point that Teramac differs from conventional
computer architecture is its tolerance to defect. It is evaluated
that there are 200,000 defects in this computer, but surely it
works! And yet it could run in some of its configurations 100
times faster than a single processor workstation.
The key property of Teramac is its software-changeable
architecture feature. That is to say we can use code or
instruction to change the logic composition of Teramac. It is why
we call it Custom Configurable Computer (CCC).
Teramac consists of 864 identical chips named field programmable
gate array (FPGA). Each FPGA contains a large quantity of
computation units and a flexible connection network, which are
called LUTs and Crossbar, respectively. All the LUTs are identical
for their physical structure and can implement different logic
function. So they do not consist of digital logical component like
AND gate, buy rather with memory. LUT, whose name comes from
Look-Up Table, is a 64-bit memory block that hold 6 address lines
as input and one bit output according to the memory's content.
Then, depending on the content of the memory, LUT can perform
${2^{64}}$ kinds of logic functions. There are 65,536 LUTs in the
Teramac. About 30\% of the FPGAs(256 out of 864) are contributed
to the computation units--LUTs, and others are used for inner
connecting and signal routing. That is the function of Crossbar.
Crossbar can be considered as a wiring network whose connection
can be dynamically changed. An Crossbar network contains two
planes of crossbars. one is the date line crossbar, the other is
the address line crossbar. Actually, data line crossbar is an
array of switches connecting the cross of each rows and column.
Memory line crossbar contains an array of memory bits that can
control the status of each switches at the corresponding position.
Then we can manipulate the data line connection by setting the
memory plane with different bits. So the basic components of the
Teramac could all be programmable. The use of FPGAs allow us to
load a desired custom architecture onto Teramac through
configuration of the memory. Teramac uses a 300-megabit word
called very long instruction word (VLIW) for the presentation of
desired architecture, most of which are bits for Crossbar
configuration.
\section{Why Teramac architecture helps to Moletronics}
\label{SE:defect}
The capacity of fault tolerance of Teramac comes from its
redundant design. Considering a Crossbar network. There are couple
of pathways between two arbitrary cross section. Even if the
network has a physical defect in its circuits, we could also find
a different pathway, thus, a different VLIW to bypass the defect.
The innate redundancy and defect tolerance property of Teramac is
very important to the Moletronics technique. Producing the defect
free products is costly. As an example, it is always far more
expensive for purchasing a perfectly reliable disk than a
redundant disk array. For the Moletronics products, the situation
is even worse. Building the perfect product, in some aspect, is
impossible. Thus, using the Teramac architecture to build a
defected but workable system is a feasible way.
Furthermore, beside defect tolerance, Teramac also contributes
other advantages to Moletronics. We learned that Teramac has a
homogeneous physical structure. The LUTs and Crossbars a all the
same in each FPGAs. Undoubtedly, it will great reduce cost of the
whole system.
\section{Conclusion}
\label{SE:conclusion}
The Teramac illustrates a totally different paradigm in system
design. Comparing to traditional method, it tremendously decrease
the cost of the system and make it more flexible.
\begin{theBibliography}{99}
%\setlength{\itemsep}{0mm}
%\setlength{\parskip}{0mm}
%\setlength{\topsep}{0mm}
%\setlength{\parsep}{0mm}
\bibitem{Teramac98}
James R. Heath, Philip J. Kuekes, Gregory S. Snider and R. Stanley
Williams, A Defect-Tolerant Computer Architecture: Opportunities
for Nanotecjnology, in {\em SCIENCE }, Vol.280 June, pp.1716-1721,
1998.
\bibitem{Teramac96}
W. Bruce Culbertson etc. The Teramac Custom Computer: Extending
the Limites with Defect Tolerance, in {\em Proceedings of the IEEE
Internation Symposium on Defect and Fault Tolerance in VLSL System
}, 1996.
\bibitem{Teramac97}
W. Bruce Culbertson etc., Defect Tolerance on the Teramac Custom
Computer, in {\em Proceedings of the IEEE Symposium on FPGAs for
Custom Computing Machine},1997.
\end{theBibliography}
\end{document}